Plumbing, Pipe Fitting, and Sewerage

Army FM 3-34_471 (Field Manual) Plumbing, Pipe Fitting and Sewerage is an information packed publication in ebook format that can help you solve many design, maintenance, and repair problems on different plumbing and piping projects. Have you checked on the price of a plumber lately? In many areas, they are not only expensive, but you have to call around to get one because they are all so busy. The basic plumbing and repair section has practical tips and solutions to common plumbing problems and can help you to reduce property damage if you are stuck on your own for a few hours. Liberal highly detailed illustrations and pipe capacity tables make this guide an indispensable resource for above or below ground new or old piping projects.
This manual (Revised in 2001) is a guide for engineer personnel responsible for conducting plumbing and pipe fitting operations. This manual provides information on water, waste, and heating systems and basic plumbing techniques. Use this guide to help repair fixtures, leaky pipes, and valves; to make pipe joints; to install water, waste, and heating systems; and to test and service these systems. Look at the table of contents below to see what's included in this valuable reference guide:

Goods and services provided by Weld Procedures.com (RI, United States).
Sold by 2CheckOut.com Inc. (Ohio, USA).

Table of Contents

---

	PREFACE
Chapter 1	Plumbing Systems
	Section I — Basic Water Supply and Water Distribution Systems
	Plans
	BOM
	Water Supply Lines and Branches
	Tapping the Water Main
	Installing Curb and Meter Stops
	Hot-Water Supply System
	Fire-Protection Water Systems
	Section II — Theater of Operations Water Supply and Distribution System
	Water Distribution Methods
	Plans and Installation
	Design Procedures
	Section III — Sewerage System
	Plans
	Sanitary Sewer and Drains
	Storm Sewer and Drain
	Industrial Drain
	Pipes and Fittings
	House Sewer
	Manholes
	Sewage Disposal Systems
	Sewage Disposal Facilities
	Section IV — Wastewater
	Policy
	Responsibilities
	Consideration Factors
	Collection
	Disposal
	Section V — Human Waste
	Policy
	Responsibilities
	Field Expedient Facilities
	Fixed and Installation Facilities
	Section VI — Solid Waste
	Policy
	Responsibilities
	Disposal
	Section VII — Human Waste Disposal in the Field
	Constructing and Closing Latrines
	Cathole Latrine
	Straddle-Trench Latrine
	Deep-Pit Latrine
	Bored-Hole Latrine
	Latrines in Areas With High Groundwater Tables
	Urine Disposal Facilities
	Maintenance of Urine Disposal Facilities
	Section VIII — Wastewater Disposal in the Field
	Kitchen Waste
	Grease Traps
	Evaporation Beds
	Waste Water
	Design Considerations
	Alternate Systems
	Pipe Sizes
	Pipe Cover
Chapter 2	Heating Systems
	Hot-Water Heating Systems
	Steam-Heating Systems
	Forced-Air Heating Systems
Chapter 3	Basic Plumbing Repairs and Maintenance
	Leaks
	Frozen Pipes
	Scale
	Waste System Stoppages
Chapter 4	Plumbing Fixtures
	Water Supply and Piping Requirement
	Water Closets
	Lavatories
	Sink
	Urinals
	Showers
	Bathtubs
	Laundry Tubs
	Drinking Fountains
Chapter 5	Water Heaters
	Types
	Sizes
	Operation Hazards
Chapter 6	Pipes and Fittings
	Pipe Selection
	Pipe Assembly Materials
	Pipe Measurements
	Cast-Iron Soil Pipe and Fittings
	Galvanized-Steel/Iron Pipe and Fittings
	Copper Tubing and Fittings
	Plastic Pipe and Fittings
	Other Types of Pipes and Fittings
Chapter 7	Valves and Faucets
	Section I — Valves
	Types
	Repair and Maintenance
	Section II — Faucets
	Types
	Installation
	Repairs
Chapter 8	Stacks and Branches
	Pipe Selection
	Pipe Size
	Installation
	Stack and Branch Supports
	Testing
Chapter 9	Traps and Vents
	Section I — Traps
	Use
	Types
	Trap Seal Loss
	Section II — Vents
	Installation
	Sizes
Chapter 10	Steam, Gas, and Air Piping
	Steam Piping
	Gas and Air Piping
Chapter 11	Centrifugal Pumps
	Characteristics
	Types
	Installation and Operation
	Valves
	Priming
	Maintenance and Repair
	Trouble Sources
Chapter 12	Insulation
	Types
	Installation
	Maintenance
Appendix A	Metric Conversion Chart
Appendix B	Construction Plans and Drawings
	Section I — Plans and Drawings
	Architect's Design
	Typical Water Supply and Distribution System Plan
	Typical Utility and Building Waste System Plan
	Unit Construction and Package Unit Prints
	Section II — Plumbing and Heating Symbols
	Types of Symbols
	List of Symbols
Appendix C	BOM
	Description
	Preparation
Appendix D	Pipe Sizes For Water Distribution System Design
Appendix E	Distribution Systems Design Procedures
	Design Procedures
	Dynamic Water Distribution System Design
	GLOSSARY
	BIBLIOGRAPHY
	AUTHENTICATION

 

Get your own instant down load of this handy manual here before trouble strikes for just $14.97. The download size is 3,197kb. This ebook will only run on a Windows® operating system with Internet Explorer 4.0 or above. Goods and services provided by Weld Procedures.com (RI, United States). Sold by 2CheckOut.com Inc. (Ohio, USA).